Book Chapters

     1.     Numerical Simulation of Solidification Processes, by Eshraghi (Editor), MDPI Publishing, 2023

     2.     Eshraghi, S. D. Felicelli, Advances in Understanding the Kinetics of Solidification: Modeling Microstructural Evolution, in: Manufacturing Techniques for Materials: Engineering and Engineered, Advances, and Applications, edited by T.S. Srivatsan, CRC Press, 2018.

     3.     Eshraghi, S. D. Felicelli, Advances in Additive Manufacturing: Effect of Process Parameters on Microstructure and Properties of Laser-Deposited Materials, in: Additive Manufacturing: Innovations, Advances, and Applications, edited by T.S. Srivatsan and T.S. Sudarsha, CRC Press, 2015.

 

Journal Publications

     1.     Numerical Simulation of Solidification Processes, M Eshraghi, Metals 13 (7), 1303, 2023.

     2.     Cusato, S. A. Nabavizadeh, M. Eshraghi, A Review of Large-Scale Simulations of Microstructural Evolution During Alloy Solidification, Metals, Invited Featured Paper, 13 (7), 1169, 2023

     3.     Yoshioka, M. Eshraghi, Temporal Evolution of Temperature Gradient and Solidification Rate in Laser Powder Bed Fusion Additive Manufacturing, Heat and Mass Transfer, 1-12, 2022.

     4.     Ghanavati, H. Naffakh-Moosavy, M. Moradi, M. Eshraghi, Printability and microstructure of directed energy deposited SS316l-IN718 multi-material: Numerical modeling and experimental analysis, Scientific Reports – Nature, 12 (1), 16600,, 2022.                                           

     5.     Magana, J. Yoshioka, M. Eshraghi, P. Allu, Multiphysics Modeling of Thermal Behavior, Melt Pool Geometry, and Surface Topology During Laser Additive Manufacturing, Materials & Design, 110831, 2022.

     6.     Navarro, A. Matar, S. F. Diltemiz, M. Eshraghi, Development of a low-cost wire arc additive manufacturing system, Journal of Manufacturing and Materials Processing, 6 (1), 3, 2022.

     7.     A. Nabavizadeh, S Upadhyay, M. Eshraghi, S. D. Felicelli, S. N. Tewari, R. N. Grugel, Spurious grain formation due to Marangoni convection during directional solidification of alloys in µ-g environment of International Space Station, Journal of Crystal Growth 574, 126334, 2021.

     8.     A. Nabavizadeh, H. Barua, M. Eshraghi, S. D.  Felicelli, Multiple-Grid Lattice Boltzmann Method for Natural Convection under Low and High Prandtl Numbers, Fluids 6 (4), 148, 2021.

     9.     Kong, M. Ostadhassan, B. Liu, M. Eshraghi, M. Navarro, Y. Zhang, C. Li, H. Wei, A Comparison of 3D Printed Porous Rocks with Nano X-ray Computed Tomography: Silica Sand, Gypsum Powder and Resin, American Association of Petroleum Geologists, 105 (11), 2245-2261, 2021.

     10.     A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Three-dimensional phase field modeling of columnar to equiaxed transition in directional solidification of Inconel 718 alloy, Journal of Crystal Growth, 549, 125879, 2020.

11.     S. A. Nabavizadeh, R. Lenart, M. Eshraghi, S. D. Felicelli, S. N. Tewari, R. N. Grugel, Dendritic solidification of Succinonitrile-0.24 wt% water alloy: A comparison with microgravity experiments for validating dendrite tip velocity, Acta Astronautica, 175, 163-173, 2020.

12.     R. Lenart, M. Eshraghi, Modeling columnar to equiaxed transition in directional solidification of Inconel 718 alloy, Computational Materials Science, 172, 109374, 2020.

13.     S. A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, S. N. Tewari, R. N. Grugel, The Marangoni convection effects on directional dendritic solidification, Heat and Mass Transfer, 1-13, 2019.

14.     S. A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Effect of Bubble-induced Marangoni Convection on Dendritic Solidification, International Journal of Multiphase Flow, 116, 137-152, 2019.

15.     L. Kong, M. Ostadhassan, B. Liu, M. Eshraghi, M. Navarro, Y. Zhang, C. Li, H. Wei, A Comparison of 3D Printed Porous Rocks with Nano X-ray Computed Tomography: Silica Sand, Gypsum Powder and Resin, American Association of Petroleum Geologists, 2019, Under Review.

16.     P. Hartunian, M.  Eshraghi, Effect of Build Orientation on the Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy, Journal of Manufacturing and Materials Processing, 2, 69; doi:10.3390/jmmp2040069, 2018.

17.     S. A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, A Comparative Study of the Shan-Chen Based Multiphase Lattice Boltzmann Methods for Dendritic Solidification of Binary Alloys, Applied Sciences 9 (1), 57, 2019.

18.     E. Dorari, M. Eshraghi, S. D. Felicelli, A Multiple-Grid and Multiple-Time-Step Model for Lattice Boltzmann Simulations: Application in Dendritic Solidification of Alloys, Applied Mathematical Modelling, Vol. 62, 580-594, 2018.

19.     E. E. Covarrubias, M.  Eshraghi, Surface Properties of Nickel Superalloys Processed by Additive Manufacturing, JOM, Vol. 70 (3), 336-342, 2018.

20.     M. Eshraghi, M. Hashemi, B. Jelinek, S. D. Felicelli, “Three-dimensional lattice Boltzmann modeling of dendritic solidification under forced and natural convection”, Metals, 7(11), 474, 2017.

21.   M. Eshraghi, B. Jelinek, S. D. Felicelli , “Large-scale three-dimensional simulation of dendritic solidification using lattice Boltzmann method”, Journal of Metals (JOM), Vol. 67 (8), 1786-1792, 2015.

22.   M. Eshraghi, M. Tschopp, M. Asle Zaeem,S. D. Felicelli, “Effect of resistance spot welding parameters on weld pool properties in a DP600 dual-phase steel: A parametric study using thermomechanically-coupled finite element analysis”, Materials & Design, Vol. 56, 387–397, 2014.

23.   B. Jelinek, M. Eshraghi, S. D. Felicelli, “Large-scale parallel lattice Boltzmann – cellular automaton model of two-dimensional dendritic growth”, Computer Physics Communications, Vol. 185, No. 3, 939-947, 2014.

24.   M. Eshraghi, S. D. Felicelli, B. Jelinek, “Three-dimensional simulation of solutal dendrite growth using lattice Boltzmann and cellular automaton methods”, Journal of Crystal Growth, Vol. 354, No. 1, 129–134, 2012.

25.   M. Eshraghi, S. D. Felicelli, “An Implicit Lattice Boltzmann Model for Heat Conduction with Phase Change”, International Journal of Heat and Mass Transfer, Vol. 55, 2420–2428, 2012.

26.   M. Eshraghi Kakhki, A. Kermanpur, M. A. Golozar, “Three-Dimensional Simulation of Quenching Process of Plain-Carbon Steel Gears Incorporating Phase Transformations”, Materials Science and Technology, Vol. 28, No. 2, 197-204, 2012.

27.   M. Eshraghi Kakhki, A. Kermanpur, M. A. Golozar, “Thermo-Microstructural Numerical Simulation of Quenching Process of Steels”, Journal of Advanced Materials in Engineering, Vol. 30, No. 1, 73–84, 2011.

28.   M. Eshraghi Kakhki, M. A. Golozar, A. Kermanpur, “Application of Polymeric Quenchant in Heat Treatment of Crack-Sensitive Steel Mechanical Parts: Modeling and Experiments”, Materials & Design, 32, 2870–2877, 2011.

29.   A. Kermanpur, M. R. Dadfar, B. Nekooei Rizi, M. Eshraghi, “Synthesis of Aluminum Nanoparticles by Electromagnetic Levitational Gas Condensation Method”, Journal of Nanoscience and Nanotechnology, 10, 6251–6255, 2010.

30.   M. Eshraghi-Kakhki, M.A. Soltani, K. Amini, et al, “Application of Polymeric Quenchants in Heat Treatment of Steels”, International Journal of ISSI, Vol. 6, No. 1, 34-38, 2009.

31.   M. Eshraghi Kakhki, A. Kermanpur, M. A. Golozar, “Numerical Simulation of Continuous Cooling of a Low Alloy Steel to Predict Microstructure and Hardness”, Modelling and Simulation in Materials Science and Engineering, 17, 045007, 2009.

 

Conference Publications & Presentations

    1.   Eshraghi, A. Shakibidazeh, M. Engquist “Process-Induced Texture Formation in 316L Stainless Steel Samples Processed by Wire-Laser Directed Energy Deposition”, Poster Presentation, TMS, Orlando, FL, March 2024

   2.   Eshraghi, M. Engquist, A. Shakibidazeh, “Influence of Process Parameters on Mechanical Behavior of 316L Stainless Steel Samples Processed by Wire-Laser Directed Energy Deposition”, Poster Presentation, TMS, Orlando, FL, March 2024

   3.   Engquist, A. Shakibidazeh, M. Eshraghi, “Microstructure and Mechanical Properties of SS216L Wire-Laser DED Samples”, Oral Presentation, ASTM ICAM, Washington D.C., October 30, 2023

   4.   Shakibidazeh, M. Engquist, M. Eshraghi, “Microstructural Analysis of Laser Wire DED of 316L Stainless Steel”, Poster Presentation, CSULA Student Symposium on Research, Scholarship, and Creative Activities, Los Angeles, CA, March 3, 2023

   5.   Eshraghi, A. Shakibidazeh, M. Engquist, “Analysis of Bead Geometry and Solidification Behavior during Laser Wire DED”, Oral Presentation, TMS, San Diego, CA, March 23, 2023

   6.   Shakibidazeh, M. Engquist, M. Eshraghi, “Effect of Process Parameters on Texture Formation During Directed Energy Deposition of 316L Stainless Steel”, Oral Presentation, PowderMet & AMPM, Las Vegas, NV, June 21, 2023

   7.   Engquist, A. Shakibidazeh, M. Eshraghi, “Effect of Processing parameters on 316L CRES for Laser Wire DED”, Oral Presentation, PowderMet & AMPM, Las Vegas, NV, June 21, 2023

   8.   Engquist, A. Shakibidazeh, M. Eshraghi, “Process-Structure-Property Relationships of Stainless Steel 316L DED Specimens”, Oral and Poster Presentation, PowderMet & AMPM, Las Vegas, NV, June 19, 2023

   9.   Yoshioka, M. Eshraghi, Temporal Evolution of Temperature Gradient and Solidification Rate in Laser Powder Bed Fusion Additive Manufacturing ,18th European Mechanics of Materials Conference (EMMC18) April 4 – 6, 2022, Oxford, UK.

   10.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, S. N. Tewari, R. N. Grugel, Formation of Spurious Grain During Directional Solidification of Alloys in International Space Station, American Society for Gravitational and Space Research, Annual Meeting, November 2021, Baltimore, MD.

   11.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Bubble Induced Convection During Dendritic Solidification, TMS 2020 Annual Meeting & Exhibition, February 2020, San Diego, CA.

   12.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Three-dimensional Modeling of Growth and Motion of Dendrites under Thermosolutal Convection, TMS 2020 Annual Meeting & Exhibition, February 2020, San Diego, CA.

   13.   Eshraghi, Modeling Microstructural Evolution during Selective Laser Melting Additive Manufacturing, The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10), August 2019, Xi’an, China.

   14.   Magana, M. Eshraghi, Effect of Scanning Strategies on the Melt Pool Geometry during Powder Bed Fusion Additive Manufacturing, AMPM 2019, June 2019, Phoenix, AZ.

   15.   Invited: M. Eshraghi, Additive Manufacturing: Advances, Challenges, and Opportunities, UTN Engineering Week, June 2019, Tucuman , Argentina.

   16.   Navarro; A. Matar; V. Pena; M. Eshraghi, Development of Process Parameters for a Low-cost Wire Arc Additive Manufacturing System, TMS 2019 Annual Meeting & Exhibition, March 2019, San Antonio, TX.

   17.   Magana; R. Lenart, M. Eshraghi, Prediction of Solidification Microstructure for Powder Bed Fusion Additive Manufacturing, TMS 2019 Annual Meeting & Exhibition, March 2019, San Antonio, TX.

   18.   Dorari, M. Eshraghi, S. D. Felicelli, Buoyancy-Induced Flow Pattern During Dendritic Solidification, TMS 2019 Annual Meeting & Exhibition, March 2019, San Antonio, TX.

   19.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Three-Dimensional Modeling of Bubble-Dendrite Interactions under Microgravity and Terrestrial Conditions, TMS 2019 Annual Meeting & Exhibition, March 2019, San Antonio, TX.

   20.   Dorari, M. Eshraghi, S. D. Felicelli,   Modeling 3D Dendritic Solidification Using Lattice Boltzmann Method with Multiple Grids, Materials Science & Technology Technical Meeting & Exposition, October 2018, Columbus, OH.

   21.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli,   Modeling the effects of Bubble Dynamics on Dendrite Growth During Solidification of Binary Alloy, Materials Science & Technology Technical Meeting & Exposition, October 2018, Columbus, OH.

   22.   Lenart, M. Eshraghi, S. D. Felicelli, Modeling Dendritic Solidification in Microgravity and Terrestrial Conditions, TMS Annual Meeting & Exhibition, March 2018, Phoenix, AZ.

   23.   Dorari, M. Eshraghi, S. D. Felicelli, A Lattice Boltzmann Model with Multiple Grids and Time Steps for Dendritic Solidification, TMS Annual Meeting & Exhibition, March 2018, Phoenix, AZ.

   24.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, A Phase-Field Lattice Boltzmann Model for Bubble-Dendrite Interaction During Solidification of Binary Alloys, TMS Annual Meeting & Exhibition, March 2018, Phoenix, AZ.

   25.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, Feasibility Study of Different Pseudopotential Multiphase Lattice Boltzmann Methods for Dendritic Solidification, ASME 2017 International Mechanical Engineering Congress & Exposition, November 2017, Tampa, FL.

   26.   Dorari, M. Eshraghi, S. D. Felicelli, Simulation of Dendritic Solidification Using Multiple-Grid Lattice Boltzmann Model, ASME 2017 International Mechanical Engineering Congress & Exposition, November 2017, Tampa, FL.

   27.   A. Nabavizadeh, M. Eshraghi, S. D. Felicelli, S. N. Tewari, Marangoni Effects on Bubble-Dendrite Interactions Under Microgravity and Terrestrial Conditions, 33rd Annual Meeting of the American Society for Gravitational and Space Research, Seattle, WA.

   28.   R. Tufenkjian, M. Eshraghi, A. Jamehbozorg, M. Castillo, E. Allen, E. Schiorring, Development of an Ocean-Themed Introduction to Engineering & Technology Course for Freshmen Students, Oceans MTS/IEEE, June 2017, Aberdeen, Scotland.

   29.   E. Covarrubias, M. Eshraghi, Surface Properties of Nickel Superalloys Processed by Additive Manufacturing, POWDERMET2017, June 2017, Las Vegas, NV, (NSF Student Travel Award, WINNER: Poster of Merit).

   30.   Hartunian, M. Eshraghi, Effect of Build Orientation on the Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloys, 2016 TMS Annual Meeting & Exhibition, February 2016, San Diego, CA.

   31.   Hashemi, M. Eshraghi, S. D. Felicelli, Computer Simulation of Freckle Formation Using a Three-Dimensional Micro-scale Model, TMS Annual Meeting & Exhibition, February 2016, Nashville, TN.

   32.   Invited: M. Eshraghi, S. D. Felicelli, Application of lattice Boltzmann method in modeling microstructural evolution, International Symposium on Plasticity and Its Current Applications, January 2016, Keauhou Bay, HI.

   33.   D. Felicelli, M. Eshraghi, Large-scale simulations of dendritic solidification, International Symposium on Plasticity and Its Current Applications, January 2016, Keauhou Bay, HI.

   34.   R. Hashemi, M. Eshraghi, S.D. Felicelli, A Three-Dimensional Multi-Mesh Lattice Boltzmann Model for Multiphysics Simulations, 68th Annual Meeting of the APS Division of Fluid Dynamics, November 2015, Boston, MA.

   35.   Hashemi, M. Eshraghi, S.D. Felicelli, A Lattice Boltzmann Model for Dendritic Growth Under Natural Convection, 2015 TMS Annual Meeting & Exhibition, March 2015, Orlando, FL.

   36.   Hashemi, A.R. Hashemi, M. Eshraghi, S.D. Felicelli, A Multi-Mesh Lattice Boltzmann Scheme for Modeling Solidification Microstructure, APS 67th Annual Meeting of the APS Division of Fluid Dynamics, November 2014, San Fransisco, CA.

   37.   Moasherziad, M. Eshraghi, S.D. Felicelli, Modeling Gas Microporosity Formation During Solidification of Metallic Alloys Using Lattice Boltzmann Method, ASME 2014 International Mechanical Engineering Congress & Exposition, November 2014, Montreal, Canada.

   38.   Hashemi, M. Eshraghi, S.D. Felicelli, A Numerical Study Comparing Effects of Forced and Buoyancy Convection on Columnar Dendrite Growth Using Lattice Boltzmann Method, ASME 2014 International Mechanical Engineering Congress & Exposition, November 2014, Montreal, Canada.

   39.   R. Hashemi, M. Eshraghi, S.D. Felicelli, A Multiple Grid Lattice Boltzmann Model for Three-Dimensional Dendritic Solidification Under Convection, ASME 2014 International Mechanical Engineering Congress & Exposition, November 2014, Montreal, Canada.

   40.   Eshraghi, M. Asle Zaeem, H. Yin, B. Jelinek, S. D. Felicelli, “Cellular Automaton, Phase Field and Lattice Boltzmann methods for modeling dendritic solidification”, ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA, November 2013.

   41.   D. Felicelli, M. Eshraghi, B. Jelinek, “Large-scale simulation of dendritic solidification”,  The 8th Pacific Rim International Conference on Advanced Materials and Processing, Waikoloa, HI, August 2013.

   42.   Eshraghi, M. Tschopp, M. Asle Zaeem,S. D. Felicelli, “A parametric study of resistance spot welding of a dual-phase steel using finite element analysis,  The 8th Pacific Rim International Conference on Advanced Materials and Processing, Waikoloa, HI, August 2013.

   43.   Eshraghi, B. Jelinek, S. D. Felicelli, “A Three-dimensional Lattice Boltzmann Model for Columnar Dendrite Growth”, 2nd World Congress on Integrated Computational Materials Engineering, Salt Lake City, UT, July 2013.

   44.   Eshraghi, B. Jelinek, S. D. Felicelli, “A three-dimensional lattice Boltzmann-cellular automaton model for dendritic solidification under convection”, 2013 TMS Annual Meeting & Exhibition, San Antonio, TX, March 2013.

   45.   Jelinek, M. Eshraghi, S. D. Felicelli, “Large scale parallel lattice Boltzmann model of dendritic growth”, 2013 TMS Annual Meeting & Exhibition, San Antonio, TX, March 2013.

   46.   Eshraghi, S. D. Felicelli, “Three Dimensional Simulation of Dendritic Solidification by Lattice Boltzmann and Cellular Automaton Methods”, International Conference on 3D Materials Science, Seven Springs, PA, July 2012.

   47.   Eshraghi, S. D. Felicelli, “Numerical Modeling of Dendritic Growth During Solidification of Alloys Using Lattice Boltzmann and Cellular Automaton Methods”, 2012 TMS Annual Meeting & Exhibition, Orlando, FL, March 2012.

   48.   Eshraghi-Kakhki, Sergio D. Felicelli, Liang Wang, “An Implicit Lattice Boltzmann Model for Heat Conduction Incorporating Phase Change”, The ASME Applied Mechanics and Materials Conference, Chicago, IL, May 2011.

   49.   Eshraghi-Kakhki, M.A. Soltani, K. Amini, et al, “Employing Polymeric Solutions as Quenching Medium in Heat Treatment of Steels”, Steel Symposium 88, Iran Alloy Steel Company, Yazd, Iran, March 2010.

   50.   Kermanpur, M. R. Dadfar, M. Eshraghi, “Synthesis of Aluminum Nanoparticles by Electromagnetic Levitational Gas Condensation Method”, 1st International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems, Halkidiki, Greece, June 2008.

   51.   Eshraghi, A. Kermanpur, M. A. Golozar, “Predicting Microstructure and Hardness of Steel Cylinders Using Numerical Modeling of Quenching Process”,  16th Annual International Conference on Mechanical Engineering, Kerman, Iran, May 2008.

   52.   Eshraghi, A. Kermanpur, M. A. Golozar, “Numerical Simulation of Temperature History and Phase Transformations during Continuous Cooling of Steel”, 9th Iranian Conference on Heat Treatment and Surface Engineering, Tehran, Iran, May 2008

   53.   M. Eshraghi, A. Habibollahzadeh, “Simulation of Quenching Process in Steel and Hardness Prediction”, 10th Annual Congress of Iranian Metallurgical Engineers, Mashhad, Iran, November 2006.